Just Released! cp-e MazdaSPEED3 Atmosphere Turbo Kit

 

So you’ve got the bolt-ons, you’ve got the tune, but it still just isn’t enough, right? Don’t let this keep
you up at night, because your desires can now be completely fulfilled. Here at cp-e™ we know that
you don’t want to go faster, but instead you need to go faster. That need is why countless hours in
R&D have been spent to develop the last turbo kit that you will ever need to look at for your
MazdaSPEED3.
Introducing the new MazdaSPEED3 Atmosphere™ Turbo Kit by cp-e™. This ultimate big turbo
upgrade for your MazdaSPEED3 application includes everything you need to take care of your need
for speed and take your car from a stock turbo to a new Tial Stainless Steel Big Turbo.
MSRP: $5999 GT/ $6350 GTX
PART NUMBER: MMSP3TUK
Kit Includes:
• cp-e™ MZR DISI 2.3 =LRTmani™ Turbo Manifold
• cp-e™ MazdaSPEED3 DownScream Downpipe
• cp-e™ XcelXL Intake with Filter
• cp-e™ Nviscid Big Turbo – Turbo Inlet Pipe
• Tial MVR External Wastegate
• Wastegate coolant lines
• Oil circulation lines
• Necessary gaskets, screws, clamps, couplers, and fittings
Kit Options:
• Tial VBand Turbine Housing
• GTX 2867
• GT 2871
• GT 3071
• GTX 3071
• GT 3582
• GTX 3582
• Optional Wastegate colors
This kit comes with an exhaust manifold specifically designed with Tial flanges to fit Tial VBand
Turbine Housings from GT28-GT35, and Tial MVR External Wastegates. The =LRTmani™ Turbo
Manifold is a stainless steel exhaust manifold that comes in a cast 304 stainless steel, and is
designed to allow for the most efficient exhaust flow possible.
A common setup for the turbo bypass is to use a screamer pipe, which dumps the exhaust to the
atmosphere immediately after the exhaust manifold. This practice is lackadaisical at best, so cp-e™
has taken the extra time and effort to divert the exhaust correctly. The cp-e™ DownScream diverts
gases straight into the exhaust pipes to be expelled out of the rear of the car. Having this setup keeps
your high boost events quietly intense, rather than noisy and agonizing. cp-e™ has designed this
downpipe to keep your system within a legitimate decibel range.
The shining piece to this kit is by far the cp-e™ MazdaSPEED3 DownScream. Made with 3” 304
stainless steel, this downpipe eliminates both stock catalytic converters to allow for smooth exhaust
flow and transition. Not only is this downpipe designed to give a free flowing exhaust from your turbo,
but it is also designed to attach to the Tial MVR External Wastegate. The wastegate actuates at high
pressure and causes the system to divert the engine exhaust away from the turbo.
Also included is the cp-e™ XcelXL™ Intake and Nviscid™ Turbo Inlet Pipe that will give your engine
the air it needs when it demands it so that your MazdaSPEED3 can reach higher horsepower
ranges. No turbo kit would be complete without the proper coolant and oil lines. cp-e™ has done it
right once again by also supplying you with steel braided –AN lines for your coolant and oil routing
that will fit right in with your new setup. We’re even giving you a CNC lathed –AN adapter for the oil
feeder hose to allow you to attach to your MazdaSPEED3 with no worries.