cp-e™ QKspl™ Ford Fusion Catted Downpipe
$607.46 – $827.47
Our downpipe is crafted from premium American made “bright annealed” 304 stainless steel and is mandrel bent throughout for less turbulent exhaust flow. We have included three O2 bungs to accommodate the two stock O2 sensors, and to give the ability to easily add a wideband sensor.
- Description
- Additional information
- Reviews (2)
Description
Matching the stock turbo, our Fusion Catted Downpipe includes a laser cut turbo flange. This design fits flawlessly with stock Fusion turbo flange. Premium American made “bright annealed” 304 stainless steel is mandrel bent throughout for less turbulent exhaust flow. We include three O2 bungs to accommodate the two stock O2 sensors. Additionally, we give the ability to easily add a wideband sensor. We offer an optional high flowing catalytic converter. The optional cat features a metallic monolithic honeycomb catalyst designed for maximum flow. For those opting out of the high flow cat, the off-road downpipe includes a cp-e™ Smart O2 Simulator to help eliminate the unwanted check engine light.
Fusion Catted Downpipe Features
- Laser cut turbo flange
- Extra O2 bung for adding a wideband sensor
- Laser cut stainless steel bracket
- Mate to stock exhaust or 3.00” exhaust
- Industry-leading stainless steel flex joint
- Metallic honeycomb high flow cat (optional)
- Full 3.00” mandrel bent 304 stainless steel
- Titan finish to strength material, and give clean uniform finish
- Included Smart O2 Simulator with Off-Road Downpipe
- More than 5% gains in upper RPMs
- Made in the U.S.A.
- LIFETIME Warranty
Also helping to accommodate the stock mounting, cp-e™ has designed this downpipe to use the stock downpipe support mount by welding a laser cut stainless steel bracket onto each downpipe. This braket mounts the downpipe securely and provides the extra support needed to make it last a lifetime. cp-e™ has taken the extra step to supply a custom laser cut gasket with the downpipe. Specifically this mates to the stock turbo completely leak-free.
Fusion Catted Downpipe Construction
On the outlet end of the downpipe, we have created a slip joint that allows the installer to mate it to the stock exhaust or a full 3.00” exhaust. This adapter allows the customer to buy a true full 3.00” downpipe instead of being limited to a downpipe that needs to neck down at the flange. This gives the smoothest transition to either exhaust size, and gives the option of “upgrading down the road”. Now you can have a full 3.00” downpipe without sacrificing on what exhaust you have.
Finally, the Fusion Catted Downpipe features the all-new finish from cp-e™. This satin finish not only gives a uniform clean finish throughout, but also strengthens the stainless steel and the welds for added reliability. Made in the U.S.A. and backed by a lifetime warranty, all your bases are covered.
Fusion Downpipe – The Perfect 2.0T EcoBoost DP
Bare in mind, without this adapter the 3.00” downpipe will be larger than the stock exhaust flange. Consequently allowing exhaust gases to escape past the gasket. Thanks to this adapter, the customer is buying a true full 3.00” downpipe. Rather than having the limitation of a downpipe that necks down at the flange. Along with the gasket adapter, the downpipe comes with the necessary hardware needed. Additionally, this downpipe will mount to a stock exhaust system as well as an aftermarket exhaust system.
Finally, the downpipe features the all-new finish from cp-e™. This satin finish not only gives a
uniform clean finish throughout, but also strengthens the stainless steel and the welds for added reliability. Made in the U.S.A. and backed by a lifetime warranty, all your bases are covered.
While this may not trip a Check Engine Light, we cannot guarantee that all of the codes will be in the “ready” state.
Not California exhaust compliant | No implied CARB certification | Off-road use only
CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Additional information
| Weight | 20 lbs |
|---|---|
| Dimensions | 45 × 12 × 12 in |
2 reviews for cp-e™ QKspl™ Ford Fusion Catted Downpipe
Add a review
You must be logged in to post a review.
rjguzik –
Tis down pipe is very well made and fit perfect on my 2014 AWD Fusion. Much better quality and fit than some of the cheaper ones that are available. Well worth the wait.
redfacerob (verified owner) –
I have been wanting this upgrade for about a year and finally bought it. I have made many purchases with CP-E, just like every other purchase the packing was excellent and the product is built very solid. You can tell by looking at the down pipe they took their time in making and designing this piece. After install I could tell immediate difference in turbo response time. The only problem were the new exhaust bolts, I still have stock exhaust flange and the bolts were to big to go through the holes. I took out a step dill bit and increased the size on stock hole, The fix took 10 min tops. Other than that very satisfied with end result.