cp-e™ QKspl™ Ford Focus ST Off-Road Downpipe

Purchase this product now and earn 25 BoostBucks!

Following the same successful recipe we have used for our other downpipes, our Focus downpipe replaces the choked factory pipe and its restrictive cat. The result of our efforts is reduced backpressure, decreased turbo spool time, and improved dyno results – more than 5% gains.

Also available with a catalytic converter.

Rated 5.00 out of 5 based on 5 customer ratings
(5 customer reviews)



Focus ST Off-Road Downpipe

• More than 5% gains in upper RPMs
• No power loss in lower RPMs
• CNC-lathe V-Band turbo flange
• Extra O2 bung for adding a wideband sensor
• Laser cut stainless steel bracke
• Laser cut stainless steel exhaust gasket adapter
• Industry-leading stainless steel flex joint
• Mount to 2.50” or 3.00” exhaust flanges with no exhaust leaks
• Full 3.00” mandrel bent 304 stainless steel
• Included Smart O2 Simulator with Off-Road Downpipe
• Made in the U.S.A.
• LIFETIME Warranty

Matching the stock turbo, our Focus ST Off-Road Downpipe includes a CNC lathed turbo V-Band flange for easy installation and stock compatibility. Our downpipe is crafted from premium American made “bright annealed” 304 stainless steel and is mandrel bent throughout for less turbulent exhaust flow. We have included three O2 bungs to accommodate the two stock O2 sensors, and to give the ability to easily add a wideband sensor. We offer an optional high flowing catalytic converter that features a metallic monolithic honeycomb catalyst designed for maximum flow and surface area. For those that opt-out of the high flowing cat, the off-road downpipe will include a cp-e™ Smart O2 Simulator to help eliminate the unwanted check engine light.

Also helping to accommodate the stock mounting, cp-eTM has designed this downpipe to use the
stock downpipe support mount by welding a laser cut stainless steel bracket onto each downpipe.
cp-e™ has taken the extra step to supply a laser cut gasket adapter with the downpipe. This adapter will allow the installer to install the downpipe to a stock exhaust without the worry of exhaust leaks.

Without this adapter the 3.00” downpipe will be larger than the stock exhaust flange, allowing
exhaust gases to escape past the gasket. This adapter allows the customer to buy a true full 3.00” downpipe instead of being limited to a downpipe that needs to neck down at the flange. Along with the gasket adapter, the downpipe comes with the necessary hardware needed to mount it to a stock exhaust system as well as an aftermarket exhaust system.

Finally, the Focus ST Off-Road Downpipe features the all-new finish from cp-e™. This satin finish not only gives a uniform clean finish throughout, but also strengthens the stainless steel and the welds for added reliability. Made in the U.S.A. and backed by a lifetime warranty, all your bases are covered.

cp-e™ Ford Focus ST exhaust comparison.

While this may not trip a Check Engine Light, we cannot guarantee that all of the codes will be in the “ready” state.

All off road performance parts are intended for off road use only and not for street use.
Not California exhaust compliant | No implied CARB certification | Off-road use only

CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Weight 20 lbs
Dimensions 22 x 22 x 12 in

5 reviews for cp-e™ QKspl™ Ford Focus ST Off-Road Downpipe

  1. Rated 5 out of 5

    (verified owner)

    Perfect fitment, no smell with the high flow cat.

  2. Rated 5 out of 5

    (verified owner)

    Great looking product, light weight compared to competitors, overall a good buy!

  3. Rated 5 out of 5

    (verified owner)

    This was the first product I purchased from CP-E and I was very impressed with the quality. Not only was the down pipe great quality but everything from the hardware kit and even the packaging was top quality. Out of the 3 spacers that come with the O2 bung I chose the middle size and have had no MIL light. Very impressed.

  4. Rated 5 out of 5

    Extremely satisfied with the way this downpipe sounds and performs combined with the CPE cat back exhaust. Everything I expected and more, thanks again!

  5. Rated 5 out of 5

    I ordered this downpipe about a year ago and have loved every minute of it. The quality is amazing and the two-piece design of the downpipe makes it a breeze to install. The flex joint prevents stress fractures over time because it allows the downpipe to flex with engine movement and heat expansion. Over the year with harsh Utah weather this downpipe has held up and still looks brand new. 100% would recommend this downpipe.

Add a review