Skip to product information
1 of 4

Custom Performance Engineering

Delta Core™ Ford Mustang EcoBoost Front Mount Intercooler

Delta Core™ Ford Mustang EcoBoost Front Mount Intercooler

Regular price $498.95 USD
Regular price $699.77 USD Sale price $498.95 USD
Sale Sold out
Shipping calculated at checkout.

SKU:FDCK00004T

Box Size

45 in x 12 in x 12 in

Box Weight

30.0 lbs.

Lead Time if Out of Stock

The lead time for this product, if out of stock, is 4-9 weeks. It is typically Built-To-Order and not on our shelves.

View full details

After months of engineering and development, cp-e® is proud to offer the ∆Core™ front mount intercooler for the 2.3L Mustang EcoBoost. The factory intercooler is fine for drivers who never plan to modify, but once you catch the itch to go faster, you need a better FMIC.

Mustang EcoBoost FMIC Features

  • 22" x 6.5" x 5" core
  • Low-turbulence end tank design
  • Minimal pressure drop
  • Maximized core design
  • Much lower, more consistent charge temps
  • Bolt-in design with no vehicle modification needed
  • Fully cast end tanks

We started by finding the largest core that would fit without major modification to the car. The ∆Core™ uses a bar-and-plate design for high efficiency.

Next came the end tanks, designed to enclose the large core with no cutting, no drilling, and no permanent modification. Laser-cut brackets mount the intercooler in the stock location and line it up with the factory piping, so you can upgrade the piping later as your power goals grow.

Mustang EcoBoost FMIC Construction

Every cp-e® intercooler uses cast end tanks that are welded and pressure tested with the core. Their shape and internal design are what set them apart: hours of design work and computational flow analysis went into virtually eliminating turbulence inside. Bigger intercoolers often bring more turbo lag and pressure loss, largely from turbulence in oversized tanks. By making our tanks smaller and more efficient, we kept drivability high while greatly increasing intercooler size.

The end tanks guide air for optimal flow and even distribution across the whole core. Since the back half of a typical core does only 25% of the cooling, we shaped the tanks to feed the core evenly for the most consistent intake temps.

Mustang EcoBoost FMIC Highlights

Turbulence Reduction Fins

The challenge with any intercooler upgrade is adding size without adding pressure drop, since larger cores usually suffer from turbulence. Our precisely calculated turbulence reduction fins smooth the airflow from the end tanks into the core.

On the road, that means remarkably low pressure drop and no loss in spool time.

Fully Cast Endtanks

Fully Cast End Tanks

For durability and high horsepower, nothing beats a casting. Cut-and-welded tanks can't approach the reliability of a cast part, but casting is costly and out of reach for many manufacturers.

We refuse to compromise, so every cp-e® front mount intercooler uses fully cast end tanks.

Maximized Core Size

Massive Core Size

The EcoBoost Mustang has made huge power gains in a short time, so we built a large intercooler that supports both stock-turbo and big-turbo setups, with no stock parts modified or removed.

Combined with our fin design, that makes it a top choice for stock and big turbo builds alike.

  • IC-TB Fitment

    We cannot guarantee fitment with the use of any product that moves the location of the intercooler outlet or throttle body. This includes but is not limited to throttle body spacers, port injection spacers, and aftermarket intake manifolds.

  • C.A.R.B.

    Not California emissions compliant | No implied CARB certification or exemption | Off-road use only

  • P65 WARNING

    This product contains elements that are known to the state of California to cause cancer, and birth defects or other reproductive harm.

    Read More

Customers praised this intercooler's "top notch" build quality and significant cooling performance, with charge temps near ambient. Installation is straightforward (3-4 hours), though some encountered fitment issues and bumper mounting challenges. One customer noted "ridiculously cool" temps and extended power pull capability.

  • 5 stars: 7 (78%)
  • 4 stars: 2 (22%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
m
mcue
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

Easy install ,quality design and did its job ! Great product

K
Karl
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

Installation was not difficult. Reading the other reviews helped avoid the bumper issues that several drivers encountered. The only problem I had was that the front hole for the upper side mount on the driver's side was drilled and threaded too big for the enclosed bolts, so only (7) out of (8) could be used. The intercooler is not going anywhere, but I plan to find a bigger bolt to replace the one I could use.

S
Shahmir
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

Amazing intercooler, have had no issues, charge temps are ridiculoously cool.
Only issue was that the fitment was not 100% perfect.

j
jib2025
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

Awesome product. Fit and finish was exactly as expected.

E
Ernesto
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

By far one of the best mods you can do to these ecoboost mustang! Was in the market for one that will fit in the stock location and let me tell you after many hours reading the forums the answer became clear. This intercooler was the clear winner, its the biggest intercooler that fits in the stock location, Build quality is top notch! & your getting customer service from a company that pays attention to what the customer wants. My only request was to remove the front logo for the sleeper look in my stang and they did it no questions asked.

b
bestbacon
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

Physically, the intercooler is of top quality fit and finish. Welds are done impeccably and IAT's have gone down a fair bit leading to full power pulls for a extended period of time.

Intercooler was well packed to prevent damage and the cp-e vinyl sticker was a nice freebie.

The only thing I would recommend is changing up the instructions a fair bit because I had a hard time setting the intercooler in place with the brackets put on first. It seems much smarter to just install the driver side bracket and o2 sensor after its been set in place as to not have to lift the radiator as much and potentially bending the very weak fins.

Will definitely be looking to buying the downpipe and stage 2.5 intercooler (when it becomes available) from CP-E because i was so impressed with the quality of the unit.

j
jennifer
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

I'm giving the C-PE intercooler a 5/5 starts because I am thoroughly impressed with its craftsmanship and the performance gains. The intercooler itself was much heavier than the stock, but for good reasons and I don't believe it added too much weight. The stock intercooler is "flimsy" and small. The c-pe intercooler was sturdy and appears reliable. The size is considerably larger, yet there's no modification needed to the front of the car.

As far as install time it did take us about 4 hours, but we took our time and triple checked everything as we were doing it ourselves. So it could possibly be less time. The most important thing to note is that there is a disclaimer in the instructions about a possible bolt in a tricky area where the mounting tabs are on the bumper. The problem partly was this disclaimer is on the next page after the bumbper removal instructions. Would help if it was at the beginning of the removal instructions just for safe measure. It is very easy to miss. Other than that install instructions/ pictures were great.

Performance wise I am very happy. Immediately after firing her up I could hear the whoosh of my turbo better and driving around town I could feel the difference. I did a cobb tune shortly after (that I purchased through cp-e) and the car came even more alive. The two together really gave me more power. Am very impressed! Thank you!

j
jmmats
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

Honestly I wasnt even in the market for a new IC until i read a few reviews on the heat soak issues of the factory "unit". After researching a few different manufacturers CP-e was the clear winner IMO. Un-boxing this thing it quickly became apparent that the build quality is top notch, Made in America, and is worth every penny. Fitment and installation was reasonably simple and straightforward, sans the bumper screw issue that I fell victim to. Intake temps are a few degrees from ambient give or take while moving, and +15 or so while in traffic, going back down within a few moments of moving again. best investment I have made so far. I would definitely recommend CP-e to anyone looking to keep those charge temps under control, extending the life of these motors at the same time.

A
AmericanSpy
cp-e™ ΔCore™ Ford Mustang EcoBoost Front Mount Intercooler

This is a great product. The design and craftsmanship on this inter cooler are outstanding. I immediately noticed that charge temps now sit just above ambient verses +10-20 deg with the factory unit. Installation was very simple. I will not fault CPE for their provided instructions, they are of nice quality, but I would suggest to be more descriptive and have photos that "show" the step being performed.

* It does not specifically state in the installation instructions to "REMOVE" the bumper cover mount screws located at the corners of the covers accessed through the fender wells. It mentions removing the 3 push clips. It alludes to "possibly" having to loosen or remove them. Well my bumper removed with "little effort" as they claimed, except I tore both mounting tabs clean off both sides. I will be requiring a new bumper cover.
*Installation tip: When installing the CPE cooler, leave the drivers side mounting brackets lose, this allows for much easier installation around the AC Condensor plastic shielding.